A QUICK MENU
Premalube FG™Multi-Purpose, High Temperature Grease
 |
|
|
| |
| • |
Heavy duty grease specifically formulated to solve food processing equipment problems |
| • |
Provides superior protection against contaminants, heat and high speeds up to 400,000 DN. |
| • |
Premalube FG contains a total additive package that sets it apart from other greases. |
|
Areas of Application:
| • |
Food Processing Plants |
| • |
Bottling Plants |
| • |
Dairies |
| • |
Meat & Poultry Packing Plants |
| • |
Canneries |
| • |
Industries Requiring AQIS Approved Lubricants |
Features & Benefits
| • |
Stays in place to prevent wear. |
| • |
Prevents rust and corrosion. |
| • |
White nonstaining formulation. |
| • |
Superior water resistance. |
| • |
Excellent high temperature performance. |
| • |
Exceptional heat reversion properties. |
Adhesive and Cohesive Polymers,
Tackiness Agents |
Highly-elastic polymers hold grease together and in place to reduce squeeze-out, channelling and slingoff. Prevents loss of lubricant that leaves bearings “starved”. |
| Rust and Corrosion Inhibitors |
Blocks out corrosive elements such as acids, water, condensate and steam by forming a protective barrier on equipment surfaces to prevent chemical wear. |
Anti-Wear and Friction Reducing
Additives |
Prevents metal-to-metal contact, two-surface wear, vibration and chatter. Keeps high friction surfaces, such as bearings, properly lubricated to prevent metal loss, downtime, and replacement expenses. |
| Inhibits Rust and Corrosion |
Blocks out corrosive elements such as acids, water, condensate and steam by forming a protective barrier on equipment surfaces to prevent chemical wear. |
| Intrinsic Extreme Pressure (EP) Agents |
A heat seeking additive that prevents the cold welding that can occur under heavy loads. Minimises wear while helping equipment run cooler. |
| Oxidation Inhibitors |
Extends lubricant service life by retarding the oxidation process. Provides a chemical shield that prevents the oxidizing effects of oxygen and water. |
| Intrinsic Shock Load Reducers |
Cushions impact to minimize the stress, vibration and chatter that can occur under heavy loads and during start-stop operations. |
| NLGI Grade |
FG # 2 |
| Grams per Litre |
894 |
| Penetration at 25ºC ASTM D217 |
Penetration at 25ºC 25 0C
ASTM D217 |
| Worked at 60 Strokes |
310 - 340 |
Pentration Loss after 10,000
Strokes working, % Max |
15 |
| Dropping Point, ASTM D2265, ºC |
260 |
| Minimum Working Temperature, ºC |
-18 |
4 Ball Wear, ASTM D2266, 1 Hour,
1200 RPM, 75 ºC, 40 Kg, SCAR DIA. IN mm |
0.66 |
| Weld Load, kg |
200 |
| Load Wear Index |
28.61 |
| Oxidation Stability, ASTM D942, Loss at 100 ºC After 100 Hours, kPa Max |
34.5 |
| ASTM D1743 Bearing Rust |
1,1,1 |
|
|
Premalube FG Meets or Exceeds these
Performance Requirements: |
•
|
AQIS Approved Cat. 10 Lubricant Type A |
•
|
NZ MAF Approved C 15 |
•
|
Passes U.S.P. Requirements |
•
|
FDA Regulations, Part 21, CFR 172.878
and 178.3620A |
•
|
USDA H1 and H2 |
•
|
NSF International registered Food Grade Lubricant |
| PRECAUTIONS: |
•
|
WARNING: Consult the label for full instructions and precautions before using this product. |
|
