A QUICK MENU
Mega CS™Wear-Resistant Machinable Ceramic Polymer Compound
 |
|
|
| |
| • |
Superior surface repair and protection in one |
| • |
Extra-hard ceramic particles |
| • |
Fiber reinforced |
| • |
Superior adhesion even when damp |
| • |
Ready for use in 4 to 6 hours* |
| • |
Renewable |
| |
|
|
Description
MEGA CS™
Wear-Resistant Machinable Ceramic Polymer Compound MEGA CS is a ceramic-filled high-tech polymer compound designed to rebuild and protect surfaces from fine particle abrasion, corrosion and cavitation. It is made of ultra-hard aluminium oxide ceramic particles and a state-of-the-art polymer matrix. Mega CS is very easy to mix and apply. It bonds well to steel, aluminium, cast iron, stainless steel, nickel and copper alloys, ceramic and concrete. |
Features & Benefits
| • |
Extra-hard ceramic particles provide maxmum resistance against fine particle abrasion, cavitation, erosion and frictional wear |
| • |
Fiber reinforced polymer contains ceramic fibers and various-size particles to increase strength and toughness |
| • |
Superior adhesion even when damp minimal surface preparation |
| • |
Ready for use in 4 to 6 hours* cures fast, reduces downtime |
| • |
Renewable can be applied over itself. |
| Pump housing and impellers |
Mixing blades |
Pneumatic conveyor pipes and elbows |
| Hydro turbine housings and impellers |
Tank linings |
Pipes and pipe bends |
| Cyclones |
Shafts |
Eroded valve covers |
| Water discharge nozzle |
Valve bodies |
Eroded flange faces |
| Glass-lined sheets |
Condenser tube sheets |
Eroded landing seats |
| Glass-lined pipes |
Cort nozzles on ships |
Worn chutes |
| Compressive Strength (ASTM D695) |
14,000 psi/ 96Nmm2 |
| Tensile Strength (ASTM D638) |
6,000 psi/ 41Nmm2 |
| Tensile Lap Shear (ASTM D1002) |
2,000 psi/ 13Nmm2 |
| Flexural Strength (ASTM D790) |
9,000 psi/ 62Nmm2 |
| Maximum Operating Temperature |
1770C |
| Heat Deflection Temperature (ASTM 648) |
790C |
| Hardness (ASTM D2240) |
84-87 Shore D |
| Machinability |
Carbide tools required |
| Working Time |
30 minutes at 250C |
| Curing Time |
4-6 hrs. at 210C (less at Badly worn duct Repaired and protected with MEGA CS temperatures over 380C) |
| Coverage @ 1/8” (3mm) thick |
109 sq.in. |
| Color |
Light Gray |
| Mix Ratio (by volume) |
4 parts base : 1 part activator |
| Mix Ratio (by weight) |
100 g. base : 19 g. activator |
| 2.27Kgs Kit Includes putty knife, instruction manual, gloves and towels, in a fold flat box for a mixing surface |
|
|
| PRECAUTIONS: |
•
|
WARNING: Consult the label for full instructions and precautions before using this product. |
|
