A QUICK MENU
High Top FG™ Hydraulic OilISO 32, 46, 68, 100
 |
|
|
| |
| • |
Food-grade hydraulic oil specifically formulated for food processing equipment. |
| • |
Provides superior protection against contaminants, pump wear and erratic operation |
| • |
Reduces Pump and Cylinder Wear |
| • |
Compatible with all Petroleum Hydraulic Oils |
| • |
Prevents Rust and Corrosion |
| • |
Helps Control Water and Other Contaminants |
| • |
Highly Resistant to Oxidation |
| • |
Controls Foaming |
| • |
AQIS Type A, USDA H1 and US FDA 21 CFR 178.3570 |
| |
|
|
Provides Superior Equipment Protection for:
| • |
Utility Plants and Refineries |
| • |
Paper Mills & Packaging Plants |
| • |
Canning and Bottling Facilities |
| • |
Printing |
| • |
Industrial Manufacturing |
| • |
Food Processing Plants |
| • |
Chemical Plants |
| • |
Manufacturing |
| • |
Plastic and Rubber Plants |
Features & Benefits
| • |
Hydraulic equipment designed for food processing requiring US FDA 21 CFR 178.3570 lubrication requirements, incidental food contact as authorized as an H1 lubricant, or for food plants under the jurisdiction of the USDA. |
| Pharmaceutical Grade- White Base Oil |
Highly refined pharmaceutical grade-base oil helps prevent oxidation, viscosity, shearing and carbonization - even at high temperatures. |
| Corrosion Inhibitors |
Shield sensitive metals against acids and other corrosive compounds |
| Anti-Wear Agents |
Forms a lubricant film on metal surfaces in the presence of heavy loads and high temperatures. Prevents cold welding. |
| Rust Inhibitors |
Plate metal surfaces to retard metal deterioration and reduce abrasive rust contaminants. |
| Metal Deactivators |
Prevent corrosion on yellow metals such as bronze, copper and brass. |
| Anti-Foam Agents |
Inhibit oil foaming during operation to reduce seal pressure, prevent pump cavitation wear and decrease air entrapment that can cause erratic motion. |
| Specific gravity |
0.86 |
0.86 |
0.87 |
0.87 |
| Colour |
Colourless |
| Odour |
Odourless |
| pH @ 100% |
N/A |
| % Volatile by Volume |
Nil |
| Evaporation rate |
N/A |
| Flash Point °C |
193 |
204 |
212 |
210 |
| Viscosity cSt. @40°C |
29.4-34.6 |
42.3-49.7 |
62.6-73.4 |
92-108 |
| Viscosity cSt. @100°C |
5.4 |
6.8 |
8.5 |
11.2 |
| Viscosity SUS @100°F |
152-179 |
218-257 |
324-382 |
482-565 |
| Viscosity SUS @210°F |
44 |
49 |
55 |
64 |
| Viscosity index |
107 |
105 |
103 |
102 |
| API Gravity |
32.6 |
32.2 |
31.1 |
30.6 |
| Pour point °C |
-7 |
-7 |
-7 |
-10 |
Emulsion, ASTM D-1401 40-37-3
@130°F max |
30 |
30 |
30 |
30 |
| Phosphorous % ASTM D-1091 |
0.02 |
0.02 |
0.02 |
0.02 |
Four Ball Wear, mm Scar ASTM
D-2266, 20 kg, 40 kg load |
0.32, 0.40 |
0.32, 0.40 |
0.26,
0.35 |
0.26,
0.40 |
| Oxidation stability, hrs. ASTM D-943 |
1900 |
1950 |
2000 |
2050 |
| Rust test, 24 hrs. ASTM D-665 |
No Rust (A) |
| Vickers Pump Wear Test, mg Steel |
15 |
15 |
10 |
10 |
|
|
Meets or Exceeds the Following Performance
Requirements: |
•
|
Denison-Abex HF-1, HF-2, HF-O |
•
|
Vickers I-286-S and M-2950-S |
•
|
US Steel 136 and 127 |
•
|
JCB AW VG-32 |
•
|
Parsons AMCA AW Hydraulic |
•
|
DIN 51504 part 2 |
•
|
USDA H1 |
| PRECAUTIONS: |
•
|
Do not mix with old oil. Not to be used as a make-up oil or for nonfood applications such as brake systems, automotive transmissions, aircraft. Not for Lucas hydraulic
pumps or other silver-lined pumps (use Lubemaster™ MultOil ™), systems requiring water-based hydraulic oils. Not for universal multi-purpose power transmission systems (use Lubemaster™ OILALL™). |
•
|
WARNING: Consult the label for full instructions and precautions before using this product. |
|
